CM202S | Ground Surveillance
Portable Gyro-Stabilized Imaging System
For ground-based intelligence, surveillance and reconnaissance
The CM202S is a portable, multi sensor imaging system, designed for ground-based surveillance operations. For long range target detection and identification, the CM202S includes a high definition daylight sensor with 60x optical zoom, and a cooled MWIR sensor with 20x continuous optical zoom. Optimized for mobile missions, the CM202S provides accurate intelligence at day and night while mounted on mobile ground vehicles.
Land Imaging System
Size: 203mm / 8in (D) x 320mm / 12.6in (H)
Weight: 12.1lb / 5500g
Power: Idle 55W / Peak 100W
IP Rating: IP66
(Dust Tight & Water Resistant)
Temperature: -10°C to +55°C / 14°F to +131°F
EO: 60x Optical Zoom
MWIR: 20x Optical Zoom
The CM202S provides excellent performance for a system of its size (8 inches in diameter), weight (12 lbs) and power (55 W).
Designed for mobile surveillance operations, the CM202S fits inside a backpack for easy transportation between facilities.
The compact system provides easy setup and operation for rapid situational awareness.
Optimized for harsh environmental conditions, the CM202S has been engineered to perform in high heat and humid conditions.
Intelligent Object Tracking
Gather accurate information on a target moving at high speeds, while the platform is in motion with object tracking. This feature keeps the target in the centre of the frame until an alternative command is given, providing a consistent, solid and reliable object track.
Onboard Video Encoding
All video is encoded onboard to minimize additional supporting hardware, reducing payload weight and allowing for longer flight times. Minimal hardware facilitates easier integration into UAS, aerostats and aircraft.
Enter geographic coordinates or point to a position on the map to maintain a consistent view of a location while the platform maneuvers. Gather geo-positioning data on a target for effective target acquisition.
Onboard Video Processing
Real-time video enhancements are fully integrated inside every system to help the operator achieve more from each mission.
Real-Time Video Stabilization
For a smoother video experience, real-time video stabilization corrects any jumpy and jittery movements. Real-time roll adjustments can also be automated to provide a steadier and clearer image.
Real-time navigation information is clearly displayed on the user interface (as optional overlays). This includes accurate acceleration, orientation, position and velocity data.
|Position Accuracy||0.0046° (80 µrad)|
|Elevation||+ 130° / - 30°|
|Slew Rate||150°/sec (2.6 Rad/s)|
|Power||Idle 55W / Peak 100W|
|Voltage||11 - 36v|
|Electronics||High Speed 32bit|
|Communication Link||Ethernet / RS232|
|Weight||12.1lb / 5500g|
|Depth||203mm / 8in|
|Height||320mm / 12.6in|
|Temperature||-10°C to +55°C|
14°F to +131°C
|Digital Output||h.264 MPEG2 TS|
|Snapshots||1280x720 EO / 640x512 IR (Stored On Board)|
Command and Control
OPS-Warden is AVT’s proprietary user interface that provides a vital link between the sensor and the operator. The intuitive interface is easy to use and requires little training. Designed for the operator, OPS-Warden allows operators to customize the interface to suit their mission.